Jump to content


Packet Format


  • Please log in to reply
1 reply to this topic

#1 Guest_JAS_*

Guest_JAS_*
  • Guests

Posted 01 August 2014 - 05:58 PM

Does the SimpleMAC require a specific packet format to initiate the transfer? I am sending data via HyperTerminal and no bytes are transferred over the PLC lines.



#2 chain

chain

    Advanced Member

  • Members
  • PipPipPip
  • 756 posts

Posted 04 August 2014 - 01:32 AM

Notice:Each frame length<=20Byte, will automatically make up 0 if not enough for 20; and if exceed 20, will only receive front 20 datas, if send data>20 Byte, please subpackage for transmission.Notice:Each frame length<=20Byte, will automatically make up 0 if not enough for 20; and if exceed 20, will only receive front 20 datas, if send data>20 Byte, please subpackage for transmission.

 

You can find it in User Manual: http://linksprite.co...with_Simple_MAC

 

And there's also an post about it: http://learn.linkspr...carrier-module/






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users