Jump to content


McLaren V2 - USB


  • Please log in to reply
1 reply to this topic

#1 Guest_Aurélien_*

Guest_Aurélien_*
  • Guests

Posted 08 October 2014 - 04:54 AM

Hello,
I would like to use the McLaren V2 for USB. Is it possible to do it in the same manner as it was for the UART/RS232/RS485/USB/Ethernet PLC McLaren module.
If so, is it enough to connect the USBDP(+) on the UART-TX pin, USBDM(-) on the  UART-RX pin as for the other McLaren module, or should I use more piece of hardware?
 


#2 chain

chain

    Advanced Member

  • Members
  • PipPipPip
  • 756 posts

Posted 09 October 2014 - 02:35 AM

 

Hello,
I would like to use the McLaren V2 for USB. Is it possible to do it in the same manner as it was for the UART/RS232/RS485/USB/Ethernet PLC McLaren module.
If so, is it enough to connect the USBDP(+) on the UART-TX pin, USBDM(-) on the  UART-RX pin as for the other McLaren module, or should I use more piece of hardware?

 

No,  USB and UART are different things. They need level conversion.


  • carpinteyrolkh, AviefMype and Sidneykn like this




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users