Jump to content


Photo

NFC shield


  • Please log in to reply
1 reply to this topic

#1 chain

chain

    Advanced Member

  • Members
  • PipPipPip
  • 756 posts

Posted 16 April 2015 - 01:05 AM

Hi, I have purchased an NFC ShieldV1.0 made by yourselves. I have connected it to an Arduino UNO and have downloaded "PN532" example programs into my Arduino IDE library. When I run any of the sketches from this example library, I am getting the error message "Didn't find PN53x board"

Here is the section in the sketch that is generating this message and the issue seems to be around the nfc.getFirmwareVersion...

I am not a genius where it comes to microcontrollers; am learning but I am missing something. Can you help?

Also, does your shield work on an Intel Galileo Gen 1 board?


uint32_t versiondata = nfc.getFirmwareVersion();
if (! versiondata) {
Serial.print("Didn't find PN53x board");
while (1); // halt 



#2 chain

chain

    Advanced Member

  • Members
  • PipPipPip
  • 756 posts

Posted 16 April 2015 - 01:11 AM

Here is a tutorial you can refer to :

http://learn.linkspr...eld-on-arduino/

 

Pleae check if the SPI interface of your NFC shield is connected well with your Arduino Uno.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users