Jump to content


Photo

PLC Mamba shield, skipping intermediate bytes

Mamba

  • Please log in to reply
No replies to this topic

#1 gaurav.talukdar

gaurav.talukdar

    Newbie

  • Members
  • Pip
  • 1 posts

Posted 05 May 2015 - 05:50 AM

Hi,

 

I have 2 PLC mamba modules mounted on 2 Arduino UNO boards. Both the boards run interrupt driven example code provided by Linksprite https://github.com/linksprite/mamba

 

Now the usecase and problems I faced are as follows:

 

1. I am using a serial terminal software to send and receive data between the 2 PLC modules. Baud Rate:9600 - 8 data bits-No parity-1 stop bit

 

2. If I turn on the real time feed from keyboard, it works fine. Everything I type gets transmitted flawlessly to the end device.

 

3. However if I try to transmit a string at a go, it starts skipping bytes. If I give "abcde" as input, it is received as "abce", 'd' goes missing.

 

Please advise. Thanks for the help.

 

-Gaurav 






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users