I have some problem on this board: when I set GPIO mode INPUT (Low value) on any pin (I tried pin 0 to 11) it does not applied. I made setting through linux command "echo '0' > gpioXX" in the directory "/sys/devices/virtual/misc/gpio/mode".
Furthermore when I set GPIO10 pin LOW in the directory "/sys/devices/virtual/misc/gpio/pin" the same setting is automatically made in the ../mode/GPIO10 file.
I have tried OUTPUT setting on pin 4, 7 and 8 and all the corresponding hardware pins function properly.
Please how can I set pin 10, or another, in input mode?