Jump to content


Photo

Schematic for GPIO Shield Raspberry Pi with MCP3008

Schematic

  • Please log in to reply
4 replies to this topic

#1 oppemaniac

oppemaniac

    Newbie

  • Members
  • Pip
  • 5 posts

Posted 03 April 2016 - 02:39 PM

Hey guys,

 

I try to use your Linker Kit IR Receiver with my Raspberry Pi Linker Baseboard (that with MCP3008, not the one from your wiki). Unfortunately, the PIN description on the board confuses me.  While the one from the wiki has completely traceable descriptions (http://linksprite.co...=File:P24-1.jpg), mine has for example no D18! And some are double on the baseboard! The analogue channels, UART,I2C are correctly noted on the shield. But how to map the Digital GPIO to the raspberry ones??? 

 

Here are the Digital GPIO Pin descriptions from my shield (for each of D1-D12) from top row to down row:

 

(D2,D3), (D4,D5),

(D5,D6), (12,13), (13,14), (14,15), (D15,D16),

(19,20), (20,21), (21,22), (25,26), (D26,D27)

 

I want to use the IR Receiver at Raspberry GPIO 18 via the Linkerkit baseboard... Where is D18?

 

Sincerely yours



#2 oppemaniac

oppemaniac

    Newbie

  • Members
  • Pip
  • 5 posts

Posted 04 April 2016 - 09:44 AM

Specifically, I need something like this https://s3.amazonaws...Pi_ADC_V2.0.pdffor

Linker kit Base Shield for Raspberry Pi B+/2B with ADC Interface V3.1

Where can I find it?

 

Best regards



#3 youkee

youkee

    Advanced Member

  • Administrators
  • 237 posts

Posted 05 April 2016 - 11:27 AM

I will ask for the schematic from the engineer. Wait for a while.



#4 youkee

youkee

    Advanced Member

  • Administrators
  • 237 posts

Posted 06 April 2016 - 05:00 AM

we upload the schematic file, please check the following address:

https://s3.amazonaws...Shield V3.1.PDF



#5 oppemaniac

oppemaniac

    Newbie

  • Members
  • Pip
  • 5 posts

Posted 06 April 2016 - 04:03 PM

Thank you very much for your fast reply.

 

I have just one little question, request concerning the labels on the shield. At this photo taken from your wiki http://linksprite.co...IELD_V3.1-9.JPG I am able to recognize the labels in the bottom row (from left to right: "D8", "D7", "D6", "D5", "D4", "ADC2", "ADC4"), but unfortunately the angle doesn't permit to read the labels from the connectors in the 2 upper rows. Could you also provide a picture taken from exactly the top or any clear port identification like this:

 

First row from left to right: (I cannot recognize on picture)

Second row from left to right: (I cannot recognize on picture)

Third row from left to right: "D8", "D7", "D6", "D5", "D4", "ADC2", "ADC4"

 

The reason why I need this is that my shield unfortunately lacks exactly these labels. Then I'd be able to combine your provided schematic with the labels to identify the ports correctly (from the schematic I can infer: Raspberry GPIO 12 + 13 is at Linker Shield Port D3, but since my shield has no labels for the ports and I cannot fully recognize them from your picture, I fear to use the wrong connection port)

 

Thank you in advance!







Also tagged with one or more of these keywords: Schematic

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users