Search the Community
Showing results for tags 'PCB Milling Wood Carving Rout'.
Found 1 result
Olva posted a topic in CNCA: I've assembled the kit but the spindle won't turn on. All other motors work fine but when I try to turn the spindle motor on I only here a buzzing sound and it does not turn B: There is a switch on the motherboard to select the laser engraving or carving knife engraving. You can check the attachment for the picture(IMAGE.jpg). Please check whether you have select correct and try again. A:The switch is in the correct position and when I click spindle on in the grblcontrol I have checked the voltage at the motor. It is receiving the correct voltage (24v). B: Can you please take some detail photos? A: Please see 1.jpg, 2.jpg, 3.jpg, 4.jpg, 5.jpg B: According to the pictures that you have provided, we are guessing the motor is damaged. Can you please measure the voltage on the 2 terminals of the motor directly(Please refer to the following picture 6.jpg ) to determine whether the wire is conductive wire, if it is conductive, it maybe the motor is damaged. A: I did not try was connecting the motor directly to the power supply instead of through the board to make sure the board wasn't the problem. When I do this the motor works fine so it probably is not the motor after all. Can you provide a schematic? B: Please check the follow link http://linksprite.com/wiki/index.php5?title=DIY_CNC_3_Axis_Engraver_Machine_PCB_Milling_Wood_Carving_Router_Kit_Arduino_Grbl