Jump to content
Sign in to follow this  
youkee

Install Android system for pcDuino4 Nano

Recommended Posts

pcDuino4 nano is an OEM product and you can download this Android image file.
 
 
 
Make Android Image Card
  • On a Windows PC run the HDDLLF.4.40 utility as administrator. Insert a TF card(at least 4G) into this PC and format it. After formatting is done take out the TF card, insert it into the PC again and format it with Windows internal format utility to format it to FAT32. After this formatting is done take out the card.
  • Uncompress the android.img.zip and PhoenixCard_V310.rar files. Insert the TF card you made in the previous step into a Windows PC and run the PhoenixCard_V310 utility as administrator. On the utility's main window select your TF card's drive, the wanted image file and click on "write" to start flashing the TF card.
  • Insert this card into your pcduino4 Nano's BOOT slot and power on (with a 5V/2A power source). If the green LED is on and the blue LED is blinking this indicates your pcDuino4 Nano has successfully booted.

Note: you must format your TF card before you start making it an Android image card.

 

Share this post


Link to post
Share on other sites

 

pcDuino4 nano is an OEM product and you can download this Android image file.
 
 
 
Make Android Image Card
  • On a Windows PC run the HDDLLF.4.40 utility as administrator. Insert a TF card(at least 4G) into this PC and format it. After formatting is done take out the TF card, insert it into the PC again and format it with Windows internal format utility to format it to FAT32. After this formatting is done take out the card.
  • Uncompress the android.img.zip and PhoenixCard_V310.rar files. Insert the TF card you made in the previous step into a Windows PC and run the PhoenixCard_V310 utility as administrator. On the utility's main window select your TF card's drive, the wanted image file and click on "write" to start flashing the TF card.
  • Insert this card into your pcduino4 Nano's BOOT slot and power on (with a 5V/2A power source). If the green LED is on and the blue LED is blinking this indicates your pcDuino4 Nano has successfully booted.

Note: you must format your TF card before you start making it an Android image card.

 

Do you still have these images? I cannot get the pcDuino4 Nano's image to do Ethernet and I was hoping to use another OS, preferably Ubuntu but that isn't going to happen so the Android OS would work but the link above is dead.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×